ML1 - Bed mover
Zallys ML1 bed mover is the ideal solution for eliminating manual handling of hospital beds.
- for moving beds of a total weight up to 500 kg
- compact, it guarantees access to elevators while clamped to the bed (increases the total length by only 30 cm)
- interchangeable battery pack to guarantee 24/7 operation
- button for 5-speed adjustment
- easy-to-use and lowest manual effort
- safe and silent
ML1 is the solution for moving hospital beds
Our Spare parts and Assistance services
Small size and weight
Electric bed mover ML1 sticks out just 328 mm from the edge of the bed and is less than 500 mm large and its weight is reduced to the minimum; thanks to its compactness, ML1 can easily enter elevators and move with extreme agility even in the narrow hospital corridoors.
Wheels for manual transport
The electric hospital bed mover ML1 is provided with two pivoting wheels to carry it manually when not in use.
Foldable clamp arms
The clamp arms for the connection to the bed are foldable, to save more space when not in use.
Patented traction system
The innovative ML1 traction system transfers the weight of the bed to the driving wheels through a patented spring mechanism.
Drive unit reversible and portable
The drive controller of the electric bed mover ML1 can be moved from its housing and used by the operator from the other side of the bed.
Clamps with adjustable strength
The clamps are electronically controlled from the control panel through an amperometric board.
Adjustable upper clamp
The upper clamp is adjustable in height and depth with two handles.
On request, it is possible to adapt custom clamps for different kinds of beds.
Superelastic non-marking wheels
ML1 electric bed mover is equipped with non-marking wheels with a larger contact surface on the ground to offer the maximum grip.
LED control panel
ML1 electric bed mover is provided with a control panel with LED lights to always get under control the speed, the battery charging level and when to recharge.
Interchangeable battery packs
ML1 electric bed mover is equipped with interchangeable battery packs: lightweight and easy to replace, they allow to cover several work shifts without having to leave the machine to charge.
Electric actuators for clamps
The movements of the clamps are controlled by electric actuators which are maintenance free.
Total control on your fingertip!
The clamp group at first positions itself at the correct height, then closes to connect to the bed, and lastly slightly lifts the bed to activate the traction system. All by just pushing one button!
Max. forward speed
Max.towing capacity on flat ground (without ballasts)
1. Frame characteristics
|1.80||Frame made of||Steel|
|1.83||Frame treatment||Polyester powder coating|
2. Safety data
|2.02||Emergency reverse button||On tiller head|
|2.06||Power supply disconnection device / Emergency stop||Detachable power connector|
|2.11||Drive controls||Maintained action switch|
|2.22||Noise level at operator’s ears||dB||<70|
|3.01||Max. forward speed||km/h||4,0|
|3.04||Max. backward speed||km/h||4,0|
|3.20||Max.towing capacity on flat ground (without ballasts) **||kg||500|
|3.36||Max towing force at hook **||N||600|
|3.39||Stopping distance in deceleration (without load)||m||0,9|
|3.42||* Load capacity is subject to kind of slope , kind of floor and operating time|
|3.44||** While the force expressed in N at the hook remains unchanged, the following circumstances may affect the towing capacity expressed in KG : type of ground on which the towing is performed, the use (or not) of ballasts and type of wheels mounted on the vehicle and on the trailer|
4. Drive controls
|4.01||Type of control||Tillerhead|
|4.02||Type of start control||Butterfly lever|
5. Standard battery specifications
|5.02||Batteries type||Traction AGM batteries|
|5.04||Nominal Capacity 5 h||Ah||16|
|5.05||Nominal Capacity 20 h||Ah||22|
|5.06||Weight of each battery||kg||6|
|5.10||Weight of battery pack||kg||17|
6. Available chargers
|6.42||Plug||In use in the country of destination|
6. Technical data of standard charger
|6.01||Battery charger||External - high frequency|
|6.02||Input voltage||V||110 / 240|
|6.05||Battery charger capacity||Ah||4|
|6.06||Power consumption during complete charge cycle||kWh||1|
|6.07||Operating temperature||°C||-20 / +40|
|6.10||Cooling system||Ventilation cooling|
|6.11||IP degrees of protection||IP20|
7. Drive motor
|7.10||Rating (S2 - 10')||kW||0,30|
|7.15||Maximum peak power||kW||1,60|
8. Technical data
|8.02||Transmission lubrication||In oil bath|
|9.01||Weight without batteries||kg||40|
|9.15||Weight incl. 16/22A AGM batteries||kg||57|
|10.03||Height of start control||mm||978,00|
|10.50||**For further details please click on technical draws|
11. Standard wheels
|11.03||Pivoting wheels no.||2|
|11.07||Drive wheels type||Turf tires|
|11.10||Pivoting wheels type||Slick non -marking|
|11.13||Drive tyres size||3.00-4"|
|11.16||Pivoting wheel size||Ø 80 X 2|
11. Optional wheels
|11.42||Tyres||Super-elastic non-marking wheel|
|11.43||Kind of tyres||Turf tyres|
|11.44||Drive tyres size||3.00-4"|
Zallys ML1 is the lightest and easiest to handle electric bed mover for hospital beds. Thanks to its compact size and light weight, it can easily fit into elevators and the narrowest hallways. The ML1 bed mover is equipped with adjustable clamps, electronically controlled by the operator, which fit most of hospital beds. ML1 can move up to 500 kg on a flat floor. ML1 bed mover can easily be driven with a wired control unit, reversible and portable, which can be moved from its housing, allowing the operator to use it from the other side of the bed. It is equipped with several safety systems such as emergency button and manual release of clamps. Interchangeable battery packs allow 24/7 operation to cover several work shifts.
All Zallys vehicles are produced with high quality materials and are CE certified according to the latest European normative.