JL 750 - Electric - hydraulic compact crane
The JL750 Just Lift crane by Just Lift has been designed to speed up and optimize all operations related to lifting and logistics, increasing productivity while ensuring maximum safety and ergonomics for the operator.
- Motorized tiller head guide
- Arm controls with wire control
- Hydraulic lift and extension
- Anti-tip system as standard
- 100% electric
Applications
Service
Accessories
Strengths
Performances
Contacts
Our Spare parts and Assistance services
Accessories
Strengths
330° range of action
The JL750 counterweighted crane has a ball bearing turntable that makes the 330° rotating movement smooth and lightweight.
Lifting capacity variation in the various outreach steps
The JL750 counterweighted crane can lift 750 kg in the first step, 500 kg in the second step and 380 kg in the third (the third step is an optional extension, to purchase as an accessory).
The lifting capacities are intended with the crane on a flat surface, with the arm parallel to the floor.
Potentiometer
Thanks to the practical potentiometer, the operator can control the movements of the arm with one hand, and use the other to direct the load towards the correct position.
Its ergonomic design allows you to work many hours without tiring your hand. The structure is resistant to shocks in case of falls of less than one meter from the ground.
The potentiometers allow you to control the 4 movements of the arm, adjusting the speed according to the pressure exerted, and the red button the emergency stop.
Everything at your fingertips
The integrated dashboard with LED indicators for the remaining power and the selected speed among the 5 available, can incorporate the controls of the electrical accessories, to guarantee the maximum ergonomics and safety to the operator during use.
5 speed selector switch
The 5-speed button is mounted as a standard feature on the new Zallys JL750 tiller head. By pressing it, at each click, you go to the next step. This allows a quick and convenient selection of the correct speed for the type of maneuver that the operator has to face. The Flex to Go system has been designed to bring greater maneuverability in narrow spaces and more speed on long movements.
Each click adds 20% more speed than the previous step. Speed ramp: 20% - 40% - 60% - 80% - 100% *
Once the maximum speed is reached, by pressing the button again it returns to 20%.
* These percentages refer to the maximum speed of the machine, indicated in its technical specifications.
Performances
km/h
Max. forward speed
kg
Max. lifting capacity
Technical data
Technical drawing
1. Characteristics
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 1.01 | Model number | JL140.720-4=== | |
| 1.02 | Model name | JL 750 | |
| 1.03 | Manufacturer | Zallys | |
| 1.04 | Operator | Pedestrian | |
| 1.05 | Power unit | Electric | |
| 1.07 | CE certification | ||
| 1.08 | Plant tension | V | 24 |
1. Frame characteristics
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 1.80 | Frame made of | Steel | |
| 1.83 | Frame treatment | Polyester powder coating |
2. Safety data
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 2.01 | Dead man safety system | Sensor on tiller head | |
| 2.02 | Emergency reverse button | On tiller head | |
| 2.04 | Creep speed device | Button on tillerhead | |
| 2.06 | Power supply disconnection device / Emergency stop | Detachable power connector | |
| 2.11 | Drive controls | Maintained action switch | |
| 2.15 | Wheels | Wheels protection | |
| 2.20 | Handarm vibration | m/s² | <2,5 |
| 2.22 | Noise level at operator’s ears | dB | <70 |
3. Performances
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 3.01 | Max. forward speed | km/h | 4,0 |
| 3.04 | Max. backward speed | km/h | 4,0 |
| 3.15 | Max. lifting capacity | kg | 750 |
| 3.31 | N ° Operators | 1 | |
| 3.60 | Arm lifting speed | mm/s | 22,00 |
| 3.61 | Arm descent speed | mm/s | 15,00 |
| 3.62 | Arm extension speed | mm/s | 7,00 |
| 3.63 | Arm return speed | mm/s | 5,00 |
3. Technical data of hydraulic tilting system
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 3.81 | System pressure | bar | 125,00 |
| 3.82 | Oil type | ISO VG 46 | |
| 3.83 | Oil quantity | l | 2,00 |
4. Drive controls
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 4.01 | Type of control | Tillerhead | |
| 4.02 | Type of start control | Butterfly lever | |
| 4.04 | Speed control | 5 speed button assembled on the tiller head | |
| 4.05 | Lifting system operated by | Wired pushbutton |
5. Standard battery specifications
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 5.01 | Batteries | 2 | |
| 5.02 | Batteries type | Traction AGM batteries | |
| 5.03 | Battery voltage | V | 12 |
| 5.04 | Nominal Capacity 5 h | Ah | 105 |
| 5.05 | Nominal Capacity 20 h | Ah | 130 |
| 5.06 | Weight of each battery | kg | 33 |
6. Available chargers
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 6.40 | Standard voltage | V | 220/240 |
| 6.41 | Multitension | V | 110/240 |
| 6.42 | Plug | In use in the country of destination |
6. Technical data of standard charger
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 6.01 | Battery charger | External - high frequency | |
| 6.02.1 | Input voltage max | V | 230 |
| 6.03 | Input Frequency | Hz | 50-60 |
| 6.04 | battery charger voltage type | Monophase | |
| 6.05 | Battery charger capacity | Ah | 8 |
| 6.06 | Power consumption during complete charge cycle | kWh | 2 |
| 6.07 | Operating temperature | °C | -20 / +40 |
| 6.08 | Operation display | Led | |
| 6.09 | Input fuse | A | 5 |
| 6.10 | Cooling system | Ventilation cooling | |
| 6.11 | IP degrees of protection | IP20 | |
| 6.12.1 | Width | mm | 95 |
| 6.12.2 | Length | mm | 185 |
| 6.12.3 | Height | mm | 55 |
7. Drive motor
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 7.03 | Engine | Electric | |
| 7.04 | Electricity | Direct current | |
| 7.05 | Engine voltage | V | 24 |
8. Generic technical data
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 8.01 | Transmission system | Mechanical | |
| 8.02 | Transmission lubrication | In oil bath | |
| 8.05 | Traction | Front-wheel drive | |
| 8.06 | Service brake | Electronic | |
| 8.08 | Parking brake | Electro-Mechanical | |
| 8.22 | Lifting system operated by | Cable control panel | |
| 8.23 | Structure | In steel | |
| 8.24 | Surface treatment | Polyester powder coating |
9. Weight
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 9.01 | Weight without batteries | kg | 1.080 |
| 9.09.5 | Weight incl. 105/130A AGM batteries | kg | 1.146 |
10. Dimensions
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 10.01.1 | Length max | mm | 2.994 |
| 10.01.2 | Length min | mm | 1.665 |
| 10.02 | Width | mm | 980 |
| 10.03 | Height of start control | mm | 1.302 |
| 10.05.1 | Height max | mm | 3.030 |
| 10.05.2 | Height min | mm | 2.289 |
| 10.11.1 | lifting height max | mm | 3.010 |
| 10.14 | Wheelbase | mm | 1.262 |
| 10.15 | Turning circle | m | 1,05 |
11. Standard wheels
| Réf.no. | Description | U.M. | Valeur |
|---|---|---|---|
| 11.01 | Drive wheels | 1 | |
| 11.03 | Pivoting wheels no. | 2 | |
| 11.04 | Castor wheels | 4 | |
| 11.05.1 | Tyre for fixed wheels | Polyurethane (oil resistant) | |
| 11.05.2 | Tyre for motor wheel | Polyurethane (oil resistant) | |
| 11.13 | Drive tyres size | ÃƒÆ’Ã†â€™Ãƒâ€ Ã¢â‚¬â„¢ÃƒÆ’Ã¢â‚¬Â ÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã‚Â ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚Â¢ÃƒÆ | |
| 11.16 | Pivoting wheels diameter | mm | 160 |
| 11.18 | Castor wheels diameter | mm | 200 |
We apologize for the inconvenience, the site is temporarily under maintenance.
